odisi 6100 optical distributed sensor interrogator the odisi is a 21st century strain and temperature measurement system specifcally designed to address the test challenges of 21st century advanced materials and systems . the odisi provides more than 1000 strain or temperature measurements per meter of a single high defnition fber sensor. the high defnition data can fully map the contour of strain or temperature for a structure under test. key features applications the sensor is fexible, low profle, requires no electrical source, and can be bonded to sharply curved surfaces, embedded within structures, or mounted directly to electrical surfaces. an automotive frame is instrumented with fber and then tested under load. test data is then superimposed on the cad model. defying impossible www.lunainc.com | 3155 state street, blacksburg va | support phone: 1.866.586.2682 | solutions@lunainc.com ? multichannel measurements of strain - multiplex up to 200,000 measurement locations ? flexible, lightweight and easy to install sensors reduce time to frst measurement ? passive, corrosion resistant, dielectric, fexible sensors go where other sensors cant - in bends, around corners, embedded inside materials ? long sensor life - no drift or recalibration required, cycle counts >10 7 ? large strain range and high resolution allow for mapping of complex strain felds and large strain gradients ?f characterizefstrainfon/infnewfmaterialsf andfcomplexfstructures ?f profleftemperaturefin-situftofmaximizef thefefciencyfoffcriticalfprocesses ?f measureftwo-fandfthree-dimensionalf strainffeldsftofvalidateffefmodels ?f evaluatefmulti-materialfjoining ?f embedfsensorsfwithinfmaterialsftof createfsmartfparts
odisi 6100 base configuration additional base confguration features: included with base confguration: ? odisi 6100 mainframe confgured with 1 to 8 active measurement channels ? odisi laptop controller laptop running single function linux os and odisi operating software and associated cabling ? one 50m, rugged stand-of cable per channel to connect odisi interrogator and one remote module per channel which connects odisi sensors to the stand-of cable ? standard confguration also includes a rugged shipping case, sample fber sensors (hd) and lunas fber optic sensor application kit real-time streaming data ? stream measurements in real-time at the maximum measurement rate to a fle or via tcp-ip to another computer ease of integration / ease of use ? intuitive , easy to setup and use graphical user interface ? ieee 1588 ptp (precision time protocol) synchronization ? json-based digital streaming data ? sync output ttl pulse reliability ? continuous automatic optical alignment without user intervention ? system and sensor health check ensures high data fdelity traceability ? optical frequencies validated every acquisition for accurate measurements ? strain sensors and associated coefcients calibrated with nist traceable fxtures odisi 6100 graphical user interface odisi 6100 odisi 6100 preliminary data sheet
odisi 6100 standard sensor configuration 1-8 standard length hd sensors - measurement rates strain range max length 2.5m 5m 10m gage spacing 2.6mm 62hz 40hz 25hz 12k strain 1.3mm 31hz 20hz 12hz 12k strain 0.65mm 15hz 10hz 6hz 12k strain odisi comes confgured to measure standard rayleigh high-defnition fiber optic sensors (hd-fos). these are our most economical sensors based on measurement of the rayleigh backscatter in optical fber and are best suited for static or quasi-static applications. hd sensors are also perfect for measuring large strain gradients. the table below outlines the sensor lengths and associated resolutions one can achieve with the standard/base confguration odisi 6100. transform structural testing odisi is ideal for strain measurements on and in composite materials. from materials characterization, to fe model verifcation all the way to full scale test. accelerate design with continuous, high resolution mapping of strain and temperature, hot spots and large strain gradients are easily located and accurately characterized. ensure quality with no line of sight issues and the ability to bond to curved and otherwise difcult to gage locations, odisi sensors go where no other sensors can so you get the full picture of performance. graphical depiction of an 8-channel odisi 6100 (6108) confguration showing stand-of cables, remote modules and sensors http://www.henkel - adhesives.com/ odisi 6100 odisi 6100 preliminary data sheet
rayleigh accelerator 1-8 standard length hd sensors - measurement rates strain range max length 2.5m 5m 10m gage spacing 2.6mm 250hz 160hz 100hz 12k strain 1.3mm 125hz 80hz 50hz 12k strain 0.65mm 62.5hz 40hz 25hz 12k strain 1-4 extended length hd sensors - measurement rates strain range max length 20m 50m gage spacing 2.6mm 50hz 20hz 12k strain 1.3mm 25hz 12.5hz 12k strain 0.65mm 12.5hz x 12k strain extended range feature ? adds 20m and 50m sensing length on 4 channels ? channels must be purchased separately ? each additional channel requires an extended length hd-fos remote module (sold separately) extended - measurement rates strain range max length 20m 50m gage spacing 2.6mm 13hz 5hz 12k strain 1.3mm 6hz 2.5hz 12k strain 0.65mm 3hz x 12k strain optional features high speed continuous fiber grating sensors (hs-cfg) hs-cfg sensors - measurement rates strain range max length 2m 5m gage spacing 2.6mm 160hz 100hz 3.3k strain 1.3mm 80hz 50hz 7.5k strain 0.65mm 40hz 25hz 15k strain this feature allows up to four channels of the odisi 6100 to measure strain sensors over lengths up to 50m. this feature allows the use of lunas continuous fber bragg grating (cfg) sensors. hs-cfg sensors provide enable larger signal to noise and higher speed measurements leading to higher performance in dynamic environments. ? feature is available on all active channels ? hs-cfg sensors require additional, dedicated remote modules this feature accelerates the measurement speeds for hd rayleigh sensors (hd-fos) by a factor of 4x. this option is ideal for applications that require the high data rates over large strain ranges. rayleigh accelerator is feld upgradeable through a combination of software and the addition of a small, thunderbolt? 3 expansion chassis with accelerator card. odisi 6100 odisi 6100 preliminary data sheet
3d visualization software odisi 3d visualization software allows strain or temperature data to be visualized in three dimensions directly on a cad drawing of the test article. load an .stl fle of the test article, map sensor routing and view temperature or strain in three dimensions. create movies of the evolution strain and temperature over time to gain greater insight into your design. ? easily interpret and communicate complex data ? visualize large data fles using contour and 3d mapping ? quickly focus on critical areas of interest in space and/or time ? visualize and share odisi data mapped on imported .stl fles optional features (continued) odisi 6100 odisi 6100 preliminary data sheet
notes performance parameter specification units gage spacing 2.6 mm 1.3 mm 0.65 mm hd standard length performance - strain range 12,000 12,000 12,000 ? resolution 1 1 1 ? accuracy 1 30 30 25 ? repeatability at zero strain 2 < 5 < 10 < 20 ? repeatability across full strain range 3 0.15 0.35 0.55 % dynamic loading rate 5 2.5 1 hz hd standard length performance - temperature maximum temperature (based on standard sensor. custom sensors available upon request.) 300 300 300 c minimum temperature (based on standard sensor. custom sensors available upon request.) -40 -40 -40 c resolution 0.1 0.1 0.1 c accuracy (consult factory) - - - c repeatability 0.01 0.03 0.06 % hd extended length performance - strain range 12,000 12,000 12,000 ? resolution 1 1 1 ? accuracy 1 30 30 25 ? repeatability at zero strain 2 < 20 < 30 < 40 ? repeatability across full strain range 3 0.15 0.15 0.55 % dynamic loading rate hz continuous fiber grating performance - strain range 3,300 7,500 15,000 ? resolution 1 1 1 ? accuracy 1 15 25 35 ? repeatability at zero strain 2 < 5 < 10 < 20 ? repeatability across full strain range 3 1 1 0.5 % dynamic loading rate 10 10 10 hz 1. accuracy refects odisi measurements compared to nist traceable extensiometer measurements. data based on average of 150 scans at each of seven increments of strain, from 0 to maximum strain. 2. repeatability at zero strain refers to ofset from zero with no strain applied. no fltering is applied. 3. repeatability across strain range refers to average repeatability over full strain range. repeatability is measured and refects 2 standard deviation from the mean with sample size of 150 scans. no fltering is applied. 4. specifcations are subject to change at any time odisi 6100 odisi 6100 preliminary data sheet
environmental physical certifications environmental odisi 6100 odisi controller (laptop) rayleigh accelerator units class 1 laser <10 n/a n/a mw operating temperature range 5 - 40 0 - 40 0 - 35 c storage temperature range 0 - 40 -40 - 70 c operating relative humidity (non-condensing) 10 - 90 10 - 90 20-90 % rh storage relative humidity (non-condensing) 10 - 90 10 - 95 % rh operating altitude -50 to 10,000 (-15 to 3,000) -50 to 10,000 (-15 to 3,000) ft (m) physical odisi 6100 odisi controller (laptop) rayleigh accelerator units dimensions w x d x h 13.5 x 13.9 x 4.3 (34 x 35 x 11) 14 x 9.3 x 0.7 (36 x 24 x 17) 5.6 x 8.6 x 3.5 (14 x 22 x 9) in (cm) weight 13 (6) 4 (1.8) 3.7 (1.7) lb (kg) power 50 130 60 w stand of cable 50 n/a n/a m odisi 6100 odisi 6100 preliminary data sheet
ordering information catalog number description includes odisi 6100 odisi 6100-r odisi 6100 multi-channel distributed sensing instrument. -r denotes rack mount option. instrument controller, one channel enabled, hd standard length mode (2.5m, 5m, 10m sensor lengths), one 50m stand-of cable, one remote module (to connect sensors), and ruggedized shipping case. opt6100-n n additional odisi 6100 channels up to 7 includes 50m standof cable and remote mod - ule for each channel. opt6110 high speed cfg option adds high speed continuous fber grating sen - sor option to all active channels. includes one remote module. opt6115 extended range option adds 20m and 50m hd sensing option on all active channels. note: only 4 channels can be active simultaneously. includes one remote module. opt6120 rayleigh (hd) accelerator increases measurement rates in hd/ rayleigh mode for 2.5m, 5m, and 10m modes up to 250hz, 160hz and 100 hz. includes thunderbolt ? 3 expansion chassis and accelerator card. catalog number sensors description hdsxxlc220p xxm hd strain sensor, lc2+connector, polyimide coating, 220 c hdsxxlc300p xxm hd strain sensor, lc2+connector, polyimide coating, 300 c hssxxlc200c xxm hs cfg strain sensor, lc2+connector, polyimide coating, 200 c hdtxxlc220p xxm hd temperature sensors with tefon sleeving, 220 c ltodisi6 rev.1 10/20/17 luna sales and support contact information united states, canada, south america europe, middle east, africa asia pacifc 1.866.luna ova (866.586.2682) solutions@lunainc.com +44 (0)131 666 9044 +86 135 0127 7739 odisi 6100 www.lunainc.com | 3155 state street, blacksburg va | support phone: 1.866.586.2682 | solutions@lunainc.com
|
